- YAMAKEN
- LH
- 2 Flutes Carbide End Mill Series
- 3 Flutes Carbide End Mill Series
- 4 Flutes Carbide End Mill Series
- 6 Flutes Carbide End Mill Series
- Carbide Ball Nose Series
- Corner Radius End Mills
- Carbide Roughing Series
- Carbide NC Spotting Drill
- Carbide Corner Rounding Cutters
- Cabide Center Drills
- Carbide Drills
- Carbide Percision Reamer
- Taper Flutes Carbide End Mills
- Carbide Micro Boring Tip Bars
- View All
- NACHI
- SHARP ONE
Novo Tooling Sdn Bhd
161-6, Jalan Fajar 1,
Taman Fajar 2, Jalan Bakri,
84200 Muar,
Johor, Malaysia.
161-6, Jalan Fajar 1,
Taman Fajar 2, Jalan Bakri,
84200 Muar,
Johor, Malaysia.
+6016-666 5358
+606-986 5358
+60166665358
Branch
No.5A, Jalan MJ 35,
Taman Merdeka Jaya,
75350 Melaka, Malaysia.
No.5A, Jalan MJ 35,
Taman Merdeka Jaya,
75350 Melaka, Malaysia.
Irregular Helix 35กใ~37กใ 4Flutes High Performance Heavy Cutting 4 Flutes End Mills
Previous | 2 / 11 | Next |
ltem code | Outsite Diameter(d1) mm | Flute Length(l2) mm | Overall Length(l1) mm | Shank Diameter(d2) mm |
LH4XSO-010 | 1.0 | 3.0 | 50 | 4.0 |
LH4XSO-020 | 2.0 | 6.0 | 50 | 4.0 |
LH4XSO-030 | 3.0 | 8.0 | 50 | 4.0 |
LH4XSO-040 | 4.0 | 11.0 | 50 | 4.0 |
LH4XSO-050 | 5.0 | 13.0 | 50 | 6.0 |
LH4XSO-060 | 6.0 | 15.0 | 50 | 6.0 |
LH4XSO-080 | 8.0 | 20.0 | 60 | 8.0 |
LH4XSO-100 | 10.0 | 25.0 | 75 | 10.0 |
LH4XSO-120 | 12.0 | 30.0 | 75 | 12.0 |
LH4XSO-160 | 16.0 | 40.0 | 100 | 16.0 |
LH4XSO-200 | 20.0 | 40.0 | 100 | 20.0 |